[SARC] HELP with antenna

[Pat Henagan]

HELP!!!

I found this antenna in the barn, bound in duct tape, not assembled.  I would like to know if it is something I can make a beam antenna. See description below.

Boom is 12 foot long with two "U" clamps for mounting on mast
1- section is 111 inches to the center of "U " clamp
1_ section is 109 inches to the center of "U " clamp

There are 6 pieces of radials one of which (111 piece) has small radial 4 inches parell to long radial and 27 3/4 inches long with pl 259 attached to center conductor

sections are 2 pieces all start at 55 inches x 5/8,  smaller sections on each end are 3/8 with a set screw where they slide together, see description below
1- section is 50 inch
1- section is 49 inch
2 -sections 56 1/2
2- sections 45 7/8

Can I make a beam for vhf/uhf or HF?

KG4LNX, Pat
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.oppshell.com/pipermail/sarc/attachments/20080219/b2d5e858/attachment.htm