[SARC] HELP with antenna

[Chris Johns]

Pat,
   
  Looks like you could make a beam for 10 or 6 or 2 or 440
  Here is a link that might help.
   
   http://www.hamuniverse.com/antennas.html
   
  Hold on to it. The price of metal is going up.
   
  73's
  Chris
  KI4GGH
   
   
   
  
Pat Henagan <phenagan000 at centurytel.net> wrote:
            HELP!!!
   
  I found this antenna in the barn, bound in duct tape, not assembled.  I would like to know if it is something I can make a beam antenna. See description below.
   
  Boom is 12 foot long with two "U" clamps for mounting on mast
  1- section is 111 inches to the center of "U " clamp
  1_ section is 109 inches to the center of "U " clamp
   
  There are 6 pieces of radials one of which (111 piece) has small radial 4 inches parell to long radial and 27 3/4 inches long with pl 259 attached to center conductor
   
  sections are 2 pieces all start at 55 inches x 5/8,  smaller sections on each end are 3/8 with a set screw where they slide together, see description below
  1- section is 50 inch
  1- section is 49 inch
  2 -sections 56 1/2
  2- sections 45 7/8
   
  Can I make a beam for vhf/uhf or HF?
   
  KG4LNX, Pat

_______________________________________________
SARC mailing list
SARC at oppshell.com
http://www.oppshell.com/mailman/listinfo/sarc


       
---------------------------------
Never miss a thing.   Make Yahoo your homepage.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.oppshell.com/pipermail/sarc/attachments/20080220/f9e9812a/attachment-0001.htm